October 1, 5 Frames of Washi F (120) with my 1920 Ica Icarette:

I think it’s no secret that Film Washi’s Washi S sound recording film is probably my all time favorite black and white film in 35mm format. As much as I love Washi S, I have to admit that I’ve tried very few of Film Washi’s offerings. I’ve long been curious about Washi F, the fluorographic X-ray film.

I’ve seen a few photos online shot with Washi F (ISO 100) that seemed to vary wildly in their visual qualities and characteristics and I wondered what my results with it might be like? Turns out that after shooting a roll of it I think understand why the results I saw online varied so much. It is a very eccentric film. It is very high contrast, but it’s light response curves don’t seem to be very linear. I don’t think I understand enough about films to try and explain it cogently though. Suffice it to say that everything I’ve shot with it looks like it was taken in 1900.

In this case, I thought I might try Washi F in 120 format so that I could use it in my 1920 6×6 Ica Icarette. My Icarette actually won’t accommodate 120 film (although I hear that some will). Mine was designed to use 117 roll film which has the same film size as 120 but uses a narrower spool flange and a different spool end than 120. After very clumsily re-rolling a few rolls of 120 onto 620 spools (which fit well in the Icarette, at least in the non-winding side) I realized it was much easier to just snip the excess flange material off of 120 rolls.

It did take me a while to figure out why winding the film on became so difficult after several frames until I learned that 117 and 620 film spools are only made to take six frames of 6×6 images. Even so I still persist in trying to get 12 shots to a roll with the Ica even though I sometimes get scratches in the emulsion.

The Ica is a lovely little gem of a camera, it’s surprisingly tiny and to be honest I’m not positive it dates from 1920, but there’s a knowledgable fellow on the inter webs who has an Icarette like mine but with a different shutter and lens (Icarettes came equipped with quite a wide variety of lenses and shutters available during their long production run from 1912-1925 and then 1926-1934 under the Zeiss Ikon name) and a very similar serial number who now suspects his dates from 1918.

The Ica Icarette horizontal 6×6 showing the flipped down wire viewfinder, you can also see the very clear bright line viewfinder in the upper right.
A three-quarters view of the Ica unfolded, the focus lever is on the camera bed on the other side
And the very crisp view through the bright line viewfinder

My Icarette is equipped with a 75mm f/6.8 four element Hekla Doppel Anastigmat lens and Compur 1/300th shutter. F stops are 6.8, 9, 12.5, 18 and 25 but are infinitely variable so it’s not difficult to extrapolate more modern f stops. Shutter speeds are 1 sec. 1/2, 1/5,th, 1/10th, 1/25th, 1/50th, 1/100th and 1/300th but only the two highest shutter speeds seem to be accurate. Rather than the lens moving to achieve focus the whole lens board and bellows is on rails and moves to set stops of 1, 2, 4, 8 meters and infinity, although focus is also variable between stops.

I was a little surprised to find that the bellows didn’t need to be repaired, I attribute this to them being made of actual leather as is the covering of the body.

This roll was developed in Artemisianol for my usual 15 minutes at 86° F and came out quite a bit overdeveloped. This was one of the very few films I’ve used that didn’t work well with my now standard Artemisianol process. I’ll definitely dial development time way back on my next roll of Washi F.

Cinder Block
Brandlab
This used to be Landrum’s the smallest coffee shop in Reno.
LuLou’s Restaurant
Betty Boop!

Usually I don’t do a lot of tweaking in post ,other than inversion of course, but for a few of these I really pulled down the clarity slider in Lightroom, it adds an odd blur and enhances the already very strong glow of this film. Not to everyone’s taste I’m sure, but I do like it for some high contrast images.

Light leaks and film scratches are not a plug-in but are the result of my ineptitude loading, winding (with too much film in it) and unloading the Ica.

Thanks for reading!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: